Ashly NE1600 Ne2rk 2 channel power Amplifier for sale in Huntington, IN
Ashly NE1600 Network Amplifier.e1600 The two-channel power amplifier shall deliver a minimum power of 450 Watts RMS per channel into 8 Ohms loads and 800 Watts RMS per channel into 4 Ohms loads with both channels operating. When switched into bridged-mono mode, the amplifier shall deliver at least 1600 Watts RMS into an 8 Ohms load. The power amplifier shall include XLR and Euroblock input connectors and Speakon plus Euroblock output connec- tors. It shall have balanced analog inputs and a selectable 80Hz high-pass filter. The power amplifier shall have a 26db/32dB/1.4V input sensitivity switch, remote standby for power up, and DC remote level control. It shall have Ethernet control and monitoring of power functions, level, mute, polarity, and swept-sinewave speaker load analysis. It shall have balanced and buffered analog aux outputs on XLR and Euroblock connec- tors. Frequency response shall be 20Hz to 20kHz ±1.0dB. Signal-to-Noise shall be greater than 107dB from 20Hz to 20kHz, unweighted and SMPTE intermodulation distortion shall be less than 0.5% into an 8 Ohms load, 10dB below rated output. The front panel shall provide the status of power, standby, protect, power switch disable, signal level, bridge, over-temperature, over-current, and Ethernet communication. The power amplifier will be capable of having factory installed AES3, CobraNet®, or Dante® interface options with the addition of a 4-Channel DAC card. The amplifier shall mount in a standard 19 inch rack using two spaces (3.5. high) and weigh 25.4 pounds (11.5kg) or less.
|
|
|